DIY Appliance Repair Tips

Wait! Before you call an appliance repair in Gilbert service in Arizona for help, you might be able to keep your household appliances in good condition with the help of a lot of the tips in this post.

1. Smelly Washing Machine

A bad odor in a washing machine defeats the entire reason for the appliance! If you are in the process of attempting to get your clothes so they are clean and fresh, but your unit won’t cooperate, run an empty cycle in warm water and pour in 2 cups of white vinegar and half of a cup of baking soda to eliminate the unpleasant odor. This problem commonly occurs in front-loading washers. To ensure no more odors in the future, leave the door open between cycles to let it dry out.

2. Inefficient Refrigerant

A semi-cool fridge in the kitchen is not a welcome sign. A warm refrigerator will not keep beverages cold or refreshing, and the food on the inside could also be close to spoiling! In many cases, your refrigerator won’t be in need of repair; interior might just need a cleaning. Or the coils on the rear of the unit are overdue for cleaning.

Unplug it and move it away from the kitchen wall before vacuuming the refrigerator coils. If you do not see immediate cooling improvement, it is time to hire a professional for appliance repair.

3. Clicking Igniter on Stove

If the igniter on a gas-powered oven clicks and clicks and the burner won’t light, check to be sure the burner top is in place and properly aligned. You could possibly experience this if you’ve had a recent boil over or spill on the top of the stove.

Otherwise, the reason is probably a clogged igniter. To clean the igniter on a gas stove, first remove the burner lid and dust away any loose dirt. You can also use a metal clothes pin to pick debris from the grooves of the igniter. If that doesn’t eliminate the problem, it’s smart to not disassemble a lighter unless you have right training; in this case hire a professional appliance repairman to determine the issue.

4. Broken Garbage Disposal

A kitchen sink’s garbage disposal comes with self-protection in the form of an overload trip. If it is clogged, overheats, grinds for too long, or has a different issue, the disposal might just have to be reset rather than repaired. First, please make sure the power switch is OFF. Next, locate the reset switch on the disposal unit under the kitchen sink and then press the switch. If the switch will not stay in, wait a few minutes and then press it again. Turn on the water from the faucet and then press the button on.

If the garbage disposal is clogged with waste and you the only thing you hear is a humming noise instead of the grinding of food, you might need to twist the disposal blades with a hex key to clear the jam. Next, press the reset switch to get the garbage disposal working again. If the tips above are unable to get the garbage disposal working like it should, do not give in to the temptation to shove one of your hands down into the blades to solve the problem. Be smart and schedule an appointment with a professional appliance service in Gilbert.

5. No Power from Outlet

In a kitchen or bathroom, the outlets need to be equipped with GFCI capabilities in order to protect against harm in wet areas. If a GFCI outlet is not providing power, push the red reset switch to see if it restores power.

If it doesn’t, or if you are trying on a standard outlet, make sure that a breaker has not tripped in your breaker panel. If you’re not sure if a circuit breaker was tripped, switch it so it is in the OFF position and then flip it back into the ON position. Please remember, safety around wiring is a must. Should you have concerns, call a professional service.

6. Wobbling Washing Machine

A wobbling washing machine will often create a obnoxious banging and is not a productive process to wash clothes. If yours starts knocking, the washer might be broken. To fix this problem, rotate the legs on the washing machine to lower or lift each of the corners until it is straightened out. One other possible scenario is the appliance is off balance. Lift open the top and rearrange the clothes so they are evenly dispersed inside of the drum of the appliance.

Trying this should help your washing machine to not have to work as hard. If you attempt to arrange the clothes once or twice to no avail, do not ignore the issue. You might have a loose motor or drum mount to deal with, which should be easy enough for a professional repairman to repair. But continuing to operate your washing machine when it has this issue could destroy other pieces and lead to a more significant repair later.

Call for Help

If none of these tips are able to solve your broken appliance, it’s time to schedule an appointment from Accurate Gilbert Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts

CLICK-TO-CALL